DJI Mavic Pro: Yet Another Tablet Holder (Yath)

by NoeI, published

DJI Mavic Pro: Yet Another Tablet Holder (Yath) by NoeI Jan 18, 2017


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

13574Views 1321Downloads Found in R/C Vehicles


I made the "Yet Another Tablet Holder" (in short Yath) for my Samsung SM-T710 tablet as I did not like the way it was mounted underneath the DJI Mavic Pro's RC.

The whole setup is compatible with the 1" RAM ball bases mount system.

The RAM mount double socket used is a RAM mount and is 2" long (the: RAM-B-103-A-238U)
It can be found on thingiverse, and if needed you could 3D print it.

To make Yath more universal for other tablets I also created a Velcro tablet mount. ¯\(ツ)/¯

Please fly safe!

Disclaimer: In addition, due to damage and accidents etc. by using this part I do not take any responsibility!

Print Settings


XYZ da Vinci 1.0 Pro


Doesn't Matter




main mount 30%, holder 20%


The above picture examples are all printed with PLA.

More from R/C Vehicles

view more

All Apps

Upgrade this Thing with Thingiverse Apps

Tools and Utilities

Repair, slice, or enhance this Thing

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

I’d love to use this with my iPad Mini 2. Are they compatible?

LOVE this design and mounting style!! Just like the phantom positioning of a tablet, but still access to the RC screen info!

Will this work with an iPad mini 4???

Will the tablet mount hold an iPad Air?

I do not think so.
I made it specific for a Samsung SM-T710 tablet.

I don't have a printer yet but will make this when I get one. Can I make the main section completely flat vs the three groves?

i like the design but where can i get the ball connector? Also Have you had any issues with reception with this design?

I did not notice any problems with reception / transmission.

The connector can be bought at many online places (ebay will also do)
I'm using a 2" RAM mount.
Just make sure that it is a double socket arm for a 1-inch ball bases.

You can also print one if needed (many version are available on thingiverse)
Not tested, but this one will/should do (it's 3", so a bit big!): http://www.thingiverse.com/thing:375381
(You will need to print RamMount-Key.stl, RamMount-L-v2.stl and RamMount-R-v2.stl)

Ram compatible Look-a-Like mounting system

perfect design to integrate some antenna reflector/boosters into the back of the tablet holder !