Anet A8 Hotbed Glass Corner Holder
by thfo, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple corner to safely hold a 3mm glass plate on top of the Anet A8 (and possible others) hotplate. Uses the original M3 screws with springs below.
Update 2017/01/26: Added heavy duty version
Will work with 3mm glass planes on a 3mm high hotbed. Print at least two corners for best results use 4 corners (4x corner file included).
For best results, print in ABS. Will also work in PLA if using a low temperature.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Anet A8 Hotbed Glass Corner Holder by thfo is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving thfo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure thfo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).