Calibration Cube 1 inch = 25.4 mm
by gektron, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This must be one of the simplest things on Thingiverse and a nod to the Imperial measurement system. One line of code in OpenSCAD.
cube([25.4, 25.4, 25.4]);
The cube should print with sides of 1 inch or 25.4 mm. I'm printing on a very basic printer - the Malyan M200 (same as Monoprice Select Mini) and mine comes out plus/minus 0.1 mm so I'm really pleased with that result.
I hope you find it useful :)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Calibration Cube 1 inch = 25.4 mm by gektron is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving gektron a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure gektron would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).