Prusa Y endstop to give extra length
by CraigRK, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Based on Triffid_Hunter "taller" endstop, I turned the microswitch through 90 degrees for use on the rear bar. "rrhb" also made a derivative, but didn't retain the captive nuts. I also tweaked the original to create a straight back. This one also supports both hole mountings like the original.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Prusa Y endstop to give extra length by CraigRK is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving CraigRK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure CraigRK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).