Loading
MostExcellentIndustries

MM Grinder

by MostExcellentIndustries Jan 20, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Can u upload one without a milled wall?

Tips about how to print the screen layer on an ender 3?

Would it be possible to thread the bottom and middle so they screw together? Your model works great, and I've tried to figure out how to edit the stl in Fusion but that's difficult. I'd just like to be able to screw the bottom and middle together.

Made one with 20% infill but the teeth are much too weak to even close the top and turn the grinder lol. Gonna try again with 100% but I'm kinda doubting how well it's really going to work lol. Also need to print extremely slowly for the teeth to come out clean. Still love the design and how it turned out tho, thanks for making this!

CURA has a function that allows for infill to thicken at a certain level, so the bottom can be 40% and lead to 100% in the teeth of the device

I made the model, turns out great. Thx very much for uploading this. Really love it. One question: Can you make this model with a 45 mm diameter? It really big to take it with me in the pocket. :D

You can adjust the size right in your slicer :)