Belt Tool for Raise3D printers.
by ABH_, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This tool can be used to keep the ends of the GT2 belt together while you remove the two screws that holds the cover plate on top of the sliding blocks.
When mounting the belt, the idea is to first slide the belt ends into the tool. The tool then keeps the belt in place, while you tighten the screws for the cover plate.
Modified PLA (PrimaSelect Satin White)
Hot End 215 °C
Bed 60 °C
3 top/bottom layers
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Belt Tool for Raise3D printers. by ABH_ is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ABH_ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ABH_ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).