Bracket to hold the fpv camera on the Eachine Aurora 90 quadcopter.
Print the bracket, place a piece of electrical tape or double sided tape on the bracket to pad the camera, and snap it into place from the back of the camera into the red aluminum fpv camera bracket on the copter. Includes three different sized bracket meshes for different thicknesses of double sided tape.
The Aurora 90 I received from banggood had a single piece of double sided tape holding the camera to the frame and allowed the camera to wiggle around and did not hold it well so I designed a bracket in fusion 360 to physically hold it.
Printed at 0.25mm layer height with esun ABS at 100% infill.