Lockable gate bolt

by jlee1026 Jan 24, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I used a .6mm nozzle and .3mm layers and printed the whole thing in about 2 hours a 60mm/s. I did do some light cleanup due to overextrusion (first time using this size nozzle) but the Ender 3 did just fine.

Ender 3
Maker Geeks PLA 225c / 65c
.6mm Nozzle
.3mm Layer Height with .78mm Width
4 Shells
30% Infill
No Supports except under the bolt itself
I did some quick sanding to pretty it up.

I am using this with a cheap wooden "pressure expanding" gate. I used this latch and some hinges I made myself to turn a 20 dollar gate into a 100 dollar swinging Gate!