Malyan M150 Bed Level Nut - ZigZag Pattern

by atkraptor Jan 25, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for sharing..
I've printed them and like them for a while (Anet A6).
Unfortunately, after a while of using, I find out that it was a little hard to handle. When I do have to make adjustments, the grip is not that good and I break my shorts nails sometime!
I have to admit that it is only for the back screw, front screw work OK.

I printed them the first week I've got my machine. I couldn't design my own things at this time and I appreciate your help.
I'll design my own now an maybe post my design on Thingiverse like you did for me!

Thanks from Québec, Canada

Hi Alex...

Thanks for the update. I have tried to keep the nuts as big as possible to make them comfortable to use. On my Malyan M150, I just have a clearance of 2mm left. I am not sure how it is on the Anet A6. You could try resizing the nut if you have a bigger gap. But I dont think it is going to help still with the nuts at the back. They will always be harder to reach and adjust unless you have easy access from the back.

It seems when i print these it closes the bottom and top off the nut :-)

It's not a setting because when i open the file in Tinkercad and just save it the model is printed fine.

Not sure why that happens. It worked fine for me without any changes. But I hope your print came out looking better than mine :)

I have no idea :-) it definitely is in the file. I tried your other nut and that is fine. They are great nuts, much better than the smaller ones i used.