These are custom sized pieces based on sadkins design to allow for the full gantry to have LED strips. For the full kit, print 2x 100mm and 1x 80mm covers for each vertical and 2x 100mm and 1x horizontal, which is resized to fit. Clip on the verticals before the horizontal so everything fits together tightly, it is designed to have the horizontals fit between the verticals. For the z brace lights, use 2x100mm and 1x50mm on each side. Printed in esun clear PETG, tried printing in a cheap natural PLA but it was too brittle.
Wire (This is what I had, 20 or 22ga are more than adequate): https://www.amazon.com/gp/product/B01CMHY892/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
24v to 12v converter: https://www.amazon.com/gp/product/B01M24M2PR/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
12v LED strip: https://www.amazon.com/gp/product/B00HSF65MC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Also needed: Heat shrink, soldering iron, 2 zip ties, adhesive pad to attach converter to machine
You need to have some comfort with soldering as the LED strips are all custom lengths.
http://www.thingiverse.com/thing:2064836 qty 6- PLA is fine, whatever color you want, these are orange in the picture, you want an opaque color
http://www.thingiverse.com/thing:2064648, 3 pairs of the 100mm, 1 pair of 50mm, 1 pair of 75mm, PLA is fine, you want an opaque color
http://www.thingiverse.com/thing:2064682, 10 x100mm, 2x50mm, 2x80mm and 1x horizontal- this is a special size. I printed these out of clear PETG as I had issues with the strength of the $8 el cheap natural PLA
The voltage converter fits in front of the power supply at the front of the machine, once it's stuck down you can figure out your wire lengths. I joined the wires for the gantry and right Z brace light to one wire and left to a second, using quick connects and sleeving for everything to keep things neat. All connections must be hot soldered and shrink tubed.
To assemble the printed pieces:
Gantry sides: 2x100mm led holder and 1x50mm led holder. Gantry horizontal: 2x100mm, 1x75mm led holder. LED strip from right side all the way across and down to left, making sure that you get the strip all the way into the corner and make a sharp angle or the covers won't fit. Then attach the LED covers, 2x100mm and 1x80mm on the vertical sides, 2x100mm and 1x horizontal for the horizontal side, it should be a tight fit.
Z braces: 3x100mm LED clip for each side, 2x100mm and 1x50mm led cover for each side, with a zip tie on the bottom of each to help prevent wire tug.