Adjustable FatShark Camera holder for ZMR250
by Eldritch972, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
An adjustable angle camera holder for the FatShark TVL600 camera in a ZMR250 frame. It can be mounted with the camera behind or in front of the front pillars of the frame.
The latch part on the back may come in conflict with the lower part of the frame at high angles. In this case you can simply cut the latch in two and just use the top part of it. It should still keep the camera securely in place.
You need 3 or 4 small screws 2x8mm. I used the type of screws that typically come with HobbyKing 9g servos
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Adjustable FatShark Camera holder for ZMR250 by Eldritch972 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Eldritch972 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Eldritch972 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).