Filament Torture Test
by cymon, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Whenever I test new filament I need a way to be sure I've got my settings right. So I created this.
Print with 2 shells, 0% infill, with supports on. The rest you can adjust based on what you discover.
It includes the following elements (From the key)
A - Support removal test
B - Top surface test
C - Reasonable 360 overhang test
D - Stringing test area (between tower and body)
E - Fine detail test
F - Cooking tower
First introduced here:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Filament Torture Test by cymon is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cymon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cymon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).