Dremel Router base (another one)
by cain666, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
yet another dremel router base. inspired by http://www.thingiverse.com/thing:678471
but i didnt like the locking mechanism for the height adjustment.. so i designed a new base from the ground up, it should fit a standard dremel with a 3/4 inch 12 TPI thread on the neck (to measure it the space between the threads should be 2.1mm)
the locking screw is for a M4 screw, it should be tapped before use!
i found the side were a little thin and broke easily so i made them 3mm instead of 2mm thick, and also changed the handles so they extended up the neck to add strength.. the thread on the neck piece was also a little tight so i expanded it a little hopefully it fixed the problem
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Dremel Router base (another one) by cain666 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cain666 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cain666 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).