PLEASE LIKE OR leave a comment what you don't like - I see 20 downloads and no likes or comments. Thanks!. This is a 46p 67t (67 teeth) spur gear I made for my Traxxas Slash 2WD 1/10. It's probably the fewest teeth on a spur gear that will work in combination with a 23 pinion gear. This baby zooms on my RC, but you really need to ease into the throttle so you don't strip the gear. Good luck!
Again, please leave comments if something is wrong, or Like if this worked for you. Thanks!
High is best, Medium usually okay
This spur is to be used at your own risk. Enjoy!
Scrape the loose plastic artifacts with pointy scissors.
This is based on my 70 tooth spur gear (see also) with a smaller diameter and fewer teeth.