The standard set came in a yellow box with lots of stickers on it. The stickers couldn't come off without leaving a residue, so I did what I do best - instead of wasting time taking the stickers out, I designed and printed a new one.
This will hold the 30-piece screwdriver set from yufeng
One thing to note, this isn't perfect, the slots on the left need some adjusting, which I will do shortly. The one I printed had the holders on the right side, but they were too flimsy and broke off. What I do now is my screw drivers and the tweezers rest on a foam piece. It looks neater. THE file "THICKEND" HAS NOT BEEN TESTED BY ME YET. Actually neither one has been tested but I garuntee the one without any holders will work fine.
I'm not really good at documenting things like this, so apologies if you've spent a minute or two reading this gibberish
This was printed with protopasta CF PLA filament and came out very nice looking.
THIS HAS HOLES ALREADY DESIGNED FOR THE TOP COVER FROM YOUR ORIGINAL SCREWDRIVER SET. How this works is, you print this out, then take the clear plastic cover from your original set and use that as a cover on this.
cooool the part while you print it with PLA
THIS WAS PRINTED WITH A WANHAO D4S but it's not in the option menu, so I wrote i3 v2