Loading
Tech2C

HyperCube 3D Printer Accessory Pack

by Tech2C Feb 4, 2017
Download All Files

Please Login to Comment

love your work. I have build a corexy printer but i am having problems getting marlin con figured. would it be possible for you to send me a copy of your configuration .h file? my e-mail is [email protected]

Great simple design!! Is there a file for the spool holder clamp? Or did I miss it? I hope to bolt it on my Tevo Tornado. Thanks again for all the great videos!!

Its included in the main source for Hypercube

How long is the threaded rod you used for the spool mount?

Wich cable size did you use for the cables to the x-carriage

Help, I need some help. I have a 3d printer that I set up following some videos on the internet. The printer from time to time stopped connecting to the computer via the pronterface and the repeater. All the ports are configured normally on the computer and the arduino, already I switched of computer but nevertheless does not work more, what could have happened? Help me please.

Hi! Can you post the original Ramps mount? Much easier to print :)

Had it in an archive :) Thanks for the awesome work Tech2C!

HI Tech2C, Great Pack. Which White filament did you use for this kit and which brand?

eSun white PETG.

Thanks, I have another question about PETG, it also produces warping like ABS?

It does warp a little bit. If you don't have a heated bed then your only choice is PLA.

For the spoolholder you are using white nuts, could you please link those?

They are nylon M8 nuts. I guess you could print those, just search for them on Thingiverse ;)

Nice Desing the Ramps Support, but i try print three times, 20% 70% and 100% infill, Is very thin the cables order and always when cleaning them I break. The Spool holder work great, the rods Fit right, excelent, Thanks.

I love the RAMPS LCD mount! Minimalist, but strong and reliable with slots for tool access and nut traps. Really good design. I printed the set in PETG and they both printed perfectly the first time.

Comments deleted.

8mm threaded steel

Comments deleted.

Hello!
Would it be possible to flip the two mountings from the arduino holder to the right side?
That would be great!
Thanks

EDIT: I mean the two holes for mounting to the 2020 aluminum extrusion.

I know late answer, but you could mirror it in your slicer :)

Would you consider designing a extruder cable support with a smaller diameter, 8mm diameter would work for me.

hypercube 8mm extruder cable support

Nice, i made,thanks 8mm is my diameter for extruder cable.

for the spool holder
it missed the part which hold the threaded rod on the frame!

It is in the standard HyperCube 3D Printer parts.

@Tech2C I'd love to make you a name plate if you would end up putting it on your printer. Just let me know.

@Tech2C You need to print a "Hypercube" name plate to one of the 2020 extrusions. Kinda like this: https://www.instagram.com/p/BJrDm13DqPI/

Comments deleted.

@Tech2C the "Compatible power socket - fused" link is invalid because it has the thingiverse url added to the beginning of the banggood url