It is designed so that there are holes in the rear for cables to USB Power, HDMI and Sound. This way all cables are exiting from the same side of the cabinet.
(This in my opinion is the greatest design flaw of the Raspberry. It looks nice and small, until you hook it up, then it has the footprint of a dinosaur)
You may need a 90 degree HDMI if you need video.
For the LED's you can insert a 14mm long piece of clear 3mm filament. I know it is better if they shine into the end of it, but just resting of top them works fine. But go easy on the cyanoacrylate as it hazes up the filament,... I learned.
More from Engineering
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving KronBjorn a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.