Raspberry Pi 3 Media Center Case
by jschw, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple Media Center Case for the Raspberry Pi 3 without visible Screws on the Top (the Cover is screwed through the bottom so you may need rubber pads on the bottom if you don't use countersunk screws).
Inside the Case is additional Space for an USB Key and/or a Receiver for Remote Control (e.g. X10).
To screw down the Raspberry, I enlarged the holes on the PCB carefully to 3.2 mm to use self cutting M3 Screws.
Please take a look at my open-source tool which can help you to manage your 3DP projects easily:
DaVinci 1.0 Pro
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Raspberry Pi 3 Media Center Case by jschw is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jschw a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jschw would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).