John 3:16 RBS rev d Rolling Ball Sculpture Marble Run
by swirlingbrain, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I revised the John 3:16 RBS rev c to include extra bracing so that it did not need support when 3d printed. I also removed one brace that was a problem with that rev.
The marbles and the track will probably need to be lightly sanded so that the marbles do not bounce off the track. I found it useful to roll the marble between the fingers to find bumps that need to be sanded. Running your finger over the track will help find bumps that need to be sanded. The marbles still bounce down the track and like to fly off sometimes.
The older model can be found here: http://www.thingiverse.com/thing:64764
It took me about 5 hours to print. Raft was used but no supports were used when I printed it.
NEW AND IMPROVED!:
I've made a shallower version and it seems to work better. The marbles on the shallower version are slightly smaller so that they ride lower within the track. This all works to keep the marbles on the track better.
I hope you enjoy it!
Sand the marbles and track to get rid of bumps that will cause the marble to bounce off the track.
How I Designed This
The original track was built with a script I made. I then took the model into tinkercad and added additional bracing to avoid needing to print with supports.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
John 3:16 RBS rev d Rolling Ball Sculpture Marble Run by swirlingbrain is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving swirlingbrain a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure swirlingbrain would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).