Hypercube easy Belt tensioner
by bagwan, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The easy Belt tensioner allows you to fine adjust each Belt separately. It can mounted on the existing X-Carriage without modification.
I used 4 M3 Nuts: Two on each side of the tension screws. The Nuts on the Screw-Top side are to secure the Screws after adjust the Belts.
Added a V2 with longer Screw Caps. So they can´t fall off.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hypercube easy Belt tensioner by bagwan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bagwan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bagwan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).