iPhone Tripod Mount, updated
by todbot, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Just like haasebert's original, but redesigned in Fusion 360, mostly as a way of learning Fusion 360.
The design in mostly-parametric, so you can change the height, width, and depth of the design for differently sized mobile devices.
When printed with ABS, this case works with iPhone 5 though iPhone 7 plus, both with and without cases. Depending on your PLA, this design may not flex right to act as springy clamps on the phone.
In addition to the STL files, STEP and F3D files are available.
I wrote up a small blog post about this thing here:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
iPhone Tripod Mount, updated by todbot is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving todbot a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure todbot would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).