FLUX Delta Spool Holder - 2 Piece Design

by jimustanguitar Feb 9, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Does the spool holder support the oem flux filament?

Well, it should... The OEM spools from a few years ago had a sticker over the center hole, but it looks like the new ones are open through the hub of the spool. I can't think of any reason that it wouldn't work, though.

Thanks! Printed well and fit together perfectly.

is the default sizing correct?

The STL files are exported in mm, which is standard.

awesome design..i wanted to ask if you could please split the files. i just need the 'axle' part to be taller.

would be awesome if you could please..

Most slicers will let you split or separate the solids out of an STL, so you might be able to do this yourself. If not, I'll be by my design computer this weekend and will upload them as separate parts for you.

Had to make some tweaks using Hatchbox wood filament (it extrudes a bit thick). I think I ended up with the clip at 100% (it would have clamped less aggressively at maybe 101 or 102% and the pole at around 95% and it worked out great.

Using if for a while now and have to say this is the best Flux Delta spool holder.. and I tried many.
Big thumbs up.