Bulgarian Exarch Iosif 1st
by Anar, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Гробът на Екзарх Йосиф I в южната галерия на църквата „Света Неделя”, в столицата София.
This thing is a 3D replica of a bas-relief of the bulgarian exarch Iosif (1840 - 1915) that is on the south wall of Sofia's "St Nedelya" church.
The replica is ready for printing and is 5cm x 3.8cm x 7.3mm (thickness).
It's also engraved on the bottom side.
I've added two small holes at it's top (2mm in diameter) so you can glue a piece of 1.75mm filament in them as a hook, either to use it as a keychain or as a pendant.
More about exarch Iosif can be found here (in bulgarian) : https://bg.wikipedia.org/wiki/Йосиф_I_Български
0.10mm layer thickness
Bulgaria is a fantastic country, rich of art, culture and lovely people !
I can only invite you to visit it.
The 2 small holes at the top are for gluing a small piece of 1.75mm filament as a hook for the keychain. When printing with ABS, use aceton to glue it in place.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bulgarian Exarch Iosif 1st by Anar is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Anar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Anar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).