This is not a printable thing, it is my version of best settings for the FlashForge Creator Pro printer, the 10mm cube was added to satisfy the need for a 3D file!
I decided to post the custom profiles I use for the Simplify3D software on my FlashForge Creator Pro. If you have not tried the Simplify3D software I encourage you to check it out as it is very versatile software and can help improve the quality of your prints regardless of the printer you own. It is expensive at $150 USD but well worth it, they have a 2 week trial so you can see if it meets your needs.
If you have a FlashForge Creator Pro and use Simplify3D I welcome you to import these profiles and try them out. I have changed the startup Gcode script so that the printer head stays in the back right corner (when looking from front) while heating up and then extruding a somewhat thick line on the back edge of the build plate about a third of the width of the build plate to purge the extruder before printing. I have also tweaked various speed settings as well as heat settings for various types of filament, the "standard plastics" file contains speed/temp settings for standard plastics like ABS and PLA and the "flex materials" file contains speed/temp settings for flexible filaments like TPU/Ninjaflex.
These are simply the settings that worked best for me, please feel free to modify them to your liking and post a remix or make so that others may be able to benefit from settings you have found work best.