Encoder port cover for Talon SRX
by jridley, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
You lost the cover for that port, didn't you? That connector is delicate and there's power on those pins, and a little metal sliver in there and POW there goes a $90 motor controller.
Fear not, here's a replacement. Print out a handful, 'cause you know in the heat of build you're gonna lose these things.
If printed exactly as designed, it actually snaps in to the port when pressed slightly for a very tight fit.
If your printer is a bit off cal, the SCAD is here so you can tweak the sizes a bit.
Design courtesy FRC Team 1502, Chelsea Michigan. Have fun, see you on the field!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Encoder port cover for Talon SRX by jridley is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jridley a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jridley would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).