Robot B9 Bank

by ModernGnome Mar 29, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Has anyone had success printing this? I loaded it into Cura and sent it to my Lulzbot Mini. After printing the outlines, only the screw-in plug was printing. Every few layers a few floating dots of plastic would be extruded for the body halves. Only the plug had walls. Looking at the tool path showed 98% of the print missing. I've never seen anything like it. I tried a lot of variations in layer thickness, fill %, orientation and size with just slightly different results each time. I tried loading it into 123rd Design but it never loads and locks up the program. Any suggestions?

It sounds like you might have been scaling it down in size. V2 has been posted, with thicker 0.8 mm walls and a cleaner mesh. Please try that version.

Thanks for your help and for uploading V2. I just printed the back half and it came out very well. I need to tweak a few settings and knowing it is 0.8 mm thick helps do that. Very nice job with the design. Thanks!

Comments deleted.