Loading
Tau34RUS

Fallout 4 Deathclaw

by Tau34RUS Feb 14, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

OK this model is beautiful and going to go in my personal collection. 100% size
Printing now with a .2mm nozzle at .1mm layer height -
est time: 3 days 10 hours and 48min on my modified CR-10S
Amazon Basics PLA 210c build plate 60c Ill post pics in a half a week

Comments deleted.

I reduced the size to 50%
Printing it now with support
Its at 64% finsihed. will report back when its done.

Good luck. Do not forget to share photos ;)

Hi,

I am using CURA and i was wondering what support settings people used to successfully print this with?

Did you use touching build plate or support everywhere?

-Thanks

So I used Cura as my slicer and ran into some fingers missing. Otherwise it looks great! Any idea why that may have happened? I don't know if it has to do with the auto supports generated by Cura.

If you scaled it below 100% to something like 50% they may be too small, though doing so with my settings doesn't seem to fail to generate them in the slicer. I have my supports set to Zig-zag and 70deg. If they aren't generated in the preview try under Experimental changing Slicing tolerance to Inclusive https://ultimaker.com/en/resources/52672-experimental

Because of small details you'd better not to scale it down

hopefully printing this tonight if i dont have too much trouble with mesh faults or anything like that, ill upload when its done for everyone to see and let you know if i had to change anything to make it print.

Let me know if i need to fix anything. For me it works like charm via Simplify3D, just few manual support adjustments were needed.