This is a mounting structure that slides down the standoffs of the Nemos Twig quadcopter to provide a mechanism to allow mounting your FPV camera in the quadcopter. It needs a few modifications for installation:
Want more information on the Twig frame, as well as a full build log? Check out our build log and guide here!
1) The main holes will likely need to be drilled out due to printer tolerances.
2) Small holes need to be drilled in the center of the crossbeams through which the camera sides will be screwed to the part.
3) Larger holes will need to be drilled through one half of the part which allows the camera body mounting nubs to seat into the part.