Prusa i3 5mm plywood feet
by karl_azytzeen, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This are some simple feet that I made for my CTC prusa i3, so can be easly atached to a support table.
I had placed a pair of holes so every piece can be screwed, but by now i just had glued them and works perfect.
All pieces has 0.2 mm tolerances.
CTC Prusa i3 pro B
Check all pieces to remove posible strings and ringings, otherwise the soft plywood can be damaged or pieces can be forced to any missalign.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Prusa i3 5mm plywood feet by karl_azytzeen is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving karl_azytzeen a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure karl_azytzeen would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).