With the uploaded scad file you can easily create cable chains, the parameters to change are at the end of the script (line 285 and following). The file was designed for a special purpose and was not cleaned up much before upload, but hopefully it's usable for other people too :-).
length: the total length of a chain link
outerWidth: the outer width of a chain link
outerHeight: the outer height of a chain link
angle: the angle from one chain link to another
clipDiam: the diameter of the round clip that connects to links
cables: an (multidimensional) array with diameters of the cables (include additional space of 10-20% per cable). I.e.: [[7.15, 6.6, 6.6], [7.15, 7.15, 6.6], [10.8, 6.6, 4]] => creates 3 columns with each 3 cables stacked.
The wallsizes can be changed in the module "chainLink".
The switch "singleLink" in line 321 allows to switch between a usefull view for editing and export (true) and a view to see a full half circle with the chain links attached to each other in the given angle.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.