These tool holders slide into the open spot on the top corners of the Wanhao i3 printer.
The holder on the right side will hold two sets of pliers and the Wanhao bed scraper.
The holder on the right holds a bucket, but I made it so you can take the bucket out and make a different set of inserts if you want.
If you want to use on the opposite sides of your printer, use the mirror mesh function in your slicer.
.2mm layers, 2mm wall thickness
20%, with 2mm walls this can probably be 0%
items printed were printed with PETG.
Hot end set to 250
Hotbed set to 70