Monoprice MP Mini Select E3D V6 Zero Offset Updated for Revised V1 MP Select Mini's with larger base posts (See pictures).
I modified this part to add cooling channels for additional breathing room around the V6. I added tapered holes for the MP Select with a slightly larger base mounting post. I modified the front clamp to fit a 2-in-1 style E3D V6 Fan Duct.
Added base with extra 1.5mm for larger (Official) E3D Heatsinks. This is labeled as "ZeroOffset_Bracket_Official_E3d.stl"
Do NOT attempt to print with PLA. I tried it and it does NOT work. The part will warp once it heats up.
I recommend PETG, ePC or ePA-CF with 100% Infill
If you have issues with warping try to reduce the infill but I wouldn't go below 50% infill as the part may be too weak and easily deform under heat.