Z80 Membership Card Tall Case
by Waltermixxx, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a small case for Lee hart's Z80 membership Card computer. It's designed to fit in an Altoids Mint tin. With the addition of the SIO/RAM/CP/M card, the Altoids tin was no longer tall enough to accomodate the stack of cards. So I designed one, based on the Altoids can, with cut outs for the Micro SD Card, and the FTDI serial connection :)
It's a great little retro computer project. :)
because there are not a lot of details i chose to print at .3mm instead of the usual .2mm layer height. but feel free to print at either. :) Printed it in PLA, also when installing the 3 card stack into the case, first put the SIO card, on the Z80 card, tilt and insert those two first, then you stack the front panel card onto those once they are in the case... :)
to remove the cards from the case, remove the front panel board first, then tilt the other two as you remove them... a bit tricky, but I figured it out, so can you :)
Cheers. :) I hope you guys like it. it's a small audience for this device. :)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Z80 Membership Card Tall Case by Waltermixxx is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Waltermixxx a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Waltermixxx would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).