After seeing Bondtech's mount for the v3, I decided I wanted something a little more secure. This model uses a clamp design similar to most of their other mounts. I made two different versions so feel free to print whichever you like best. The first one mounts directly onto the stock EZstruder mounting holes using the stock screws. The second design is a full plate replacement. The clamp works with either version. I have included two versions of each file: one with support and one without.
For the hardware, you'll need two 8-32x1" socket head screws, two m4x8 washers, and two 8-32 brass insert nuts. I purchased all of the hardware at Lowes(links below). When inserting the brass socket, I recommend screwing it in maybe one thread or so, heating it with a lighter, and then screwing it into the hole.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.