All the Terrain for Kingdom death (save 2, explanation later). These terrain tiles were designed with a midpoint between functionality and aesthetics. Some tiles include 2 versions so you can have more than one option and have the board look less monotonous. Please have fun and upload pictures so i can see your awesome fights with the 3d terrain, and if you can please give credit to @axolote gaming (aka me).
These are of course free, however if you would want to leave a Tip it would make me extremely happy!
The files were created in a midpoint between Aesthetics and functionality, What i did was use the original artwork and think how to make it usable for playing, what this means is most tiles have at least some space for players to get "on" the tile, and use it. The Large face can have 6 miniatures on it, however they have to be balanced on the stones on the sides (i did not want to surround it with flat surfaces and take away from the face volume. Impassable terrain is solid as you can't go aver it and if a monster does it gets destroyed, so moot point. Anyway i hope you use these terrain tiles! You can also download these other KDM files i did!
http://www.thingiverse.com/thing:2051837 - Board center 3d printable
http://www.thingiverse.com/thing:1946688 - 47 mm inserts for large mosnters
Tiles not included are:
Use for personal reasons, or distribute without profit. This project was made for no money and only because i am a huge fan, and Adam Explicitly told me that neither I nor any maker could sell these. If you want to charge for printing costs and shipping and have these delivered to other people just to help the community please be my guest.
Disclaimer: If at any point Adam or anyone KDM related asks me to put the files down, i will take them down at that point.
Supports are not needed for all models, but some need supports or will fail. Decide on your own!
Instructions for some terrain tiles
Most terrain tiles are ready to paint after printing. However I do recommend sanding, or vapor smoothing (although vapor will result in detail loss). This is in general.
After printing the tall grass keep in mind this is only the base, I used a cheap paintbrush ($2.00) that was enough for all my tall grass, and also added some static grass (desert or tundra) to fill out the gaps more. Keep in mind that if you put bristles all around you wont be able to use the sides, so use playability as the factor to decide where to use bristles and static grass.
The printable object is for the face only. After printing i used wire and greenstuff to create the leaves of the plant, after this it should be ready to paint, also this way all your arcanthus will be different which i consider a plus.