For my toolbox I needed a light but temperature-controllable soldering iron. On recommendation of a friend I bought a Mustool MT223. In addition to the soldering bob you get five soldering tips. On the road I do not need as many tips but a stand as well as a cleaning sponge. I could not find a stand that corresponds to my ideas. So I designed a foldable stand with place for three soldering tips and a sponge.
After the print, I had to file the pins of the stand round to get these into the recesses of the base. As a splint for the hinge I used 1mm copper wire.
For opening the soldering iron stand press at the front side with the thumb to the base and from the back side with the middle finger against the top - now you can raise the top without problems.
vy 73 es 55 de DH1ND
Layer height 0,2mm / 2 Shells
Special attention must be paid to the closure and the hinge.