Fan Duct for Prusa Mendel Longboat
by Danjhamer, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I have a Prusa Mendel Longboat. It has an aluminium X carriage and J head nozzle hot end. I couldnâ€™t find a duct that would fit so hereâ€™s my version to fit the Longboat.
If accommodates a 40mm x 40mm fan and will clamp on to the edge of the aluminium plate.
Iâ€™ve also designed a MOSFET controller to control the fan using a Sanguinololu with Sprinter firmware.
Schematics, instructions and firmware modifications to follow.
I printed it with a 0.5mm nozzle and 0.3mm slices in Slic3r. I did have to add some support structure manually as I canâ€™t seam to get Slic3râ€™s support material to work.
Iâ€™ve included stlâ€™s both with and without supporting structures.
Youâ€™ll need 6 nuts and screws, 2 M3 and the others to fit your fans mounting holes.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Fan Duct for Prusa Mendel Longboat by Danjhamer is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Danjhamer a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Danjhamer would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).