Loading
Rexipus

Duet Wifi controller box attaches to 2020 extrusion

by Rexipus Mar 3, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Why are there only two stl?

Hi,
thanks for the nice job.
I would like to make some mods for to use your box over an 3030 alu rail but unfortunately seem that something is wrong on the solidworks file and I am not able to solve the problem my self, can you check the file please?
The file that I am using is : seth_custom_duet_wifi_case_Update_14_March_17.SLDPRT
Tnx.

OK I solved the problem my self.
Tnx

Ah, sorry I didn't see the message yesterday. Yeah sometimes when I'm editing a part in SW I'll get one of these things where geometry that something had a relation too is removed, and it says a sketch has an error. If it doesn't stop me continuing the part I don't always go back and hunt those down. Sorry about that.

I hope you enjoy the box. I've got it mounted to my Dbot right now and I like it a lot. Has all the holes in it that I need for wiring the Dbot from the directions that make sense for that printer, and hopefully enough to fit most printers with a neat wiring solution.

When you get yours done would you mind posting a make of it?

Hi, you did a good and nice job.
the problem with solidworks was just as described by you, but I am still able to do my changes, simple changes, I decreased the number of slots for the air flow and I change the side flap anchor, the lip, for use the box with a 3030 aluminum profile.
Unfortunately the first printing went wrong, when it came around 90% the X axis belt have a failure .... as you might know, the print time for this object is very long, and so it was like a drama.
now the second printing is at 91%, when it's over, finger crossed, I'll make a posting on I make it.
Thanks again.