Crane Magnetic Hook
by PiMinister, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an attachment we have used for a model crane that we adapted to be controlled by a Raspberry Pi. The attachment has a cylindrical hole inside the structure, into which a magnet can be dropped. In order to drop the magnet into the print, it is necessary to pause the print at a print height of 4.5mm (this can be done in Cura by using the 'Pause at height' plugin).
The magnet we have used is 18mm in diameter, and 3mm thick (http://cpc.farnell.com/duratool/d01768/magnets-rare-earth-18-x-3mm-pk3/dp/TL14071), but a smaller magnet could be used if necessary.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Crane Magnetic Hook by PiMinister is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PiMinister a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PiMinister would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).