Loading
Desmen

FPV Goggles for DJI with NVIDIA Shield K1. Eachine goggles 2 mod

by Desmen Mar 10, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks for this design! Perfect! I printed the version that removes the diversity antenna's as I wont be needing to use those. I have an NVidia Shield K1 Tablet with HDMI Output. I use the tablet to fly my DJI Mavic Pro and now can use these inexpensive Eachine Googles Two to have FPV!

Thanks to whomever created HotGlue as well. :)

Much smaller and even lighter than the original Eachine Goggles Two housing. I will post this under the "Makes" section as well.

I'm glad you like it. Enjoy them

Hola,
me gustaría reducir el tamaño de las gafas manteniendo todo la electrónica y antenas. Con este diseño se puede? Gracias

FPV Goggles. Eachine goggles 2 mod
by Desmen

Hola, solo cabe la placa HDMI, la otra no me interesaba para el uso en un Mavic pro. Ahora estoy de vacas, si después tengo tiempo le echaré un vistazo y meter la otra placa.

If you do not want to disassemble the screen, my design is not worth since the form would be totally different and the size would increase considerably:

  • X axis: The screen is not centered horizontally with respect to the electronic card. For the screen to be centered in the casing you have to leave the electronic card aside and increase the width on the other side.
  • Z axis: The depth must be increased by adding the width of the electronic card behind the display.
  • Y axis: You must also increase the height by the width of the electronic card.

It is not difficult to disassemble the screen. All you need is a tin soldering iron to disassemble and a glue gun to attach to the electronic board.

Comments deleted.