2205 soft mount and guard
by Zugara, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
2205 soft mount & motor guard in one. protect dirt ingress if yoou crash. soft all round with 2mm clearance around the motor bell.
Printed with TPU 1.75mm on Wanhao D6 printer
nozzle temp 228
bed temp 63
material flow 100
Found this to be the best print speed/settings after plenty of trial and error.
I always keep plenty of slack on the filament so as to avoid any "pulling" by the extruder.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
2205 soft mount and guard by Zugara is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Zugara a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Zugara would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).