Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Solidoodle Nozzle Bedlevel Probe
by Claghorn, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I hope this will someday describe how to detect the print bed level on a Solidoodle using a FSR (force sensitive resistor). At the moment, this is just a little part I printed to anchor the wires from the resistor to provide strain relief and keep the resistor from moving. It is screwed on with the extruder fan, and replaces the stack of washers that come with the Solidoodle. It also has a hook for the other end of the spring that goes with http://www.thingiverse.com/thing:214112.
Lots of details on the evolution and progress of this thing can be found at: http://home.comcast.net/~tomhorsley/hardware/solidoodle/solidoodle-bedlevel.html
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Solidoodle Nozzle Bedlevel Probe by Claghorn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Claghorn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Claghorn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).