Loading
GofX

HyperCube Y_Shaft_Clamp_REMIXED

by GofX Mar 11, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for the great designs. I did have some issues adding screws to attach the left stepper motor due to the thickness of this bracket, but other than that they are pretty good.

Thank you! :-)
I first attached the motor to the motor mount and then the motor mount together with the shaft clamp on the frame. This works without problems.

I think your Y_shaft_motor_clamp and your regular clamp are not correct. When I import them into an assembly, the Y_shafts are not on the same plane. Please see the attached photo.

Hi banana_muffin.
Thank you for your response!
I guess, you have to check your assembly.
The centers of both Y-Rods are at the same height: 17mm below the 2020 frame corner brackets.
The height of the motor mounts has to be different, because the belts will run one above the other. They can not run at the same height.
Please also look Tech2C's assembly video at youtube, "New 3D Printer - Build Log #4" ~12:00min.
Cheers,
Glenn

Only issue I have is that they aren't inside the frame. If I switch them around so they stay in the frame the motor compatible one can't be locked or tightened. I do like them a lot thought. Great quality!

These are a must have addition to any hypercube. Simple, easy, and much more durable. Well done!

Like this design. The normal one is not real stable and this one is except there is a little weakness on the motor one but still very reliable. Now if one of you great modelers can model a X/Y Joiner for 3/8" rod X-Axis to a 10mm rod on the Y-Axis rod that is using either a LM10UU or LML10UU bearing that would great!

12 mm would be nice also :)

Dame ... i have 10mm Y Achses :(

Ist erledigt! :-)