This was so that the camera had better light but could be powered when the OCTOPI was on. Very simple only took about 2hrs for me.
The base of the opening for the clip is exactly the width of the frame, but it tapers to a smaller width the closer you get to the tips.
I noticed a little give from the adhesive one the strips.. so I added new clips. that will hold the strips in place. Nice snug fit!
If you print this with a raft it will warp.....or at least mine did.
Overview and Background
3528smd LEDs (5V power supply)
Per strip, I used about 13 LED per side(3) and cut right in the middle of the copper pads.
Removed the resin covering the pads and soldered wires about 3-4inches long.
Removed the 3M sticky cover and placed them on the the printed clips.
Clip them on and enjoy.
Lesson Plan and Activity
You will need a basic knowledge of soldering but can easily get by with little to no knowledge.
How to Do It: Basic Soldering:
I used PETG and a simple 5V LED strip from amazon that came prewired (https://www.amazon.com/gp/product/B015R87GQK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1)