Tired of not seeing your beautiful i3 print?
Don't sit around, slap an IKEA Dioder strip on your Prusa!
Choose between the single, dual or triple mount.
Print 2 of the chosen mounts and your Dioder strip will sit nicely behind the vertical frame and has enough clearance with your Spool holder and filament guide.
I soldered the wires of the Dioder to an unused output of the 12V power supply. This way they will power on and off together with the printer, but are semi-independent. Solder the R, G, and B wires together and screw into to the -12V terminal. Screw the +12V (W) wire from the LED strip to the +12V terminal.
The 003 models all point toward the center of the build plate location. The 004 SpreadLight version spreads the light distribution over the entire build plate.
Print in PLA, ABS, PETG or other stiff material.
I used 2 perimeters with 25% honeycomb infill.