PCB Holder 4cm x 6cm
by lilmikey, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I created some amplifier circuits for my virtual pinball project: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/
I build them on small, cheap uxcell 4x6cm perf boards: https://www.amazon.com/gp/product/B0166GCD42/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1 and needed a decent way to mount them to the cabinet. The perf boards snap in and hold snugly and can be secured by 4 screws. The images are of an earlier 2-screw version.
Easy to print. Nothing special. There is a 45 degree overhand where the board snaps in. Should not require supports on most printers.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PCB Holder 4cm x 6cm by lilmikey is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving lilmikey a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure lilmikey would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).