Loading

Nintendo Switch Laser Engrave Template

by Tomtortoise, published

Nintendo Switch Laser Engrave Template by Tomtortoise Mar 17, 2017

Contents

Tags

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

1760Views 78Downloads Found in 2D Art

Summary

Make sure to turn vector cut off!!!!!

Link to blog post with more pictures and a short write-up

https://tt3d.xyz/2017/03/17/switch-lasering-complete/

This is a Corel Draw File template that outlines the boundaries of the NORTH AMERICAN SWITCH (There is s different silkscreen layout for other regions so be careful) Just place your images on the layer that is named "Place your images on this layer" and the boundary layer will do the masking off where it should not cut. If your laser is aligned properly, you just place it your Switch face down, text reading correctly, at 0,0 on the bed.

suggested power on an Epilog 40W CO2 laser is speed 50%, power 12% but feel free to experiment. Make sure to turn vector cut OFF!

Also attached is a .DWG file to import into other image programs of your choice

Make sure to NOT VECTOR CUT when using the laser as that will slice your switch

More from 2D Art

view more

All Apps

Upgrade this Thing with Thingiverse Apps


No results.

Thanks for this! I'm putting together a Yoshi's island graphic if anyone is interested. Please take the back off before engraving though!

i think doing this might void the warrenty on the switch

Top