This is the leg hose connector used on the Ghostbusters uniform from the first movie. It is modeled off of the connector designed by tgoacher but has a much higher polygon count so it is smooth. It will fit a 1/2" flexible hose and allow you to use 4 X 10mm neodymium magnets on the bottom (you can find them here: https://www.amazon.com/gp/product/B01NGYFDOL/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1). The magnets can be used with a metal plate or 1 1/2" washer on the inside of the flight suit to keep the hose connector attached. I modeled a plug that when inserted in the hose will produce enough friction the hose will not easily fall out of the connector. I also modeled a belt clip to use that will allow the hose to clip and unclip to the belt easily..
Here is the video I made for the hose connector: https://youtu.be/y_7-k2Lkx3s
Dremel Idea Builder
More from Props
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving optimusgene a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.