Customizable Stereographic Skull v2
by threonin, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Again big thanks to Joe Balint for suggesting to simply remove the corners for easier printing! This way I was able to crank the resolution up to 100x100 pixels and have it still sliceable in Simplify3D!
Make sure to have no important detail on the corners, because it will be lost. How much detail is removed can be adjusted with the setting "corner cutoff", the default settings worked fine for me with printing at 100%.
Printed in 18h 16min at 60mm/sec.
The print is not perfect, probably a higher resolution or slower speed would give cleaner results.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Customizable Stereographic Skull v2 by threonin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving threonin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure threonin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).