Double Sided Picture Frame
by ayedeyglo, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a double sided picture frame. It fits two 4X6's. Print all three parts and apply a small amount of glue in the wholes and connect together. The slot for the pictures is wide enough for thin glass inserts in front of the pictures. Please make sure supports aren't made on the visible part of the frame, so flip it so its face up. This is my first thingiverse post so enjoy and donate if you so please! comment below for suggestions and questions.
Maker Select V2.1
I gave the base higher infill, like at least 40% so that it is heavier. I also found that triangle supports are much easier to remove! Also please flip so that support structures are not on the visible side of the frames. The base needs no supports.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Double Sided Picture Frame by ayedeyglo is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ayedeyglo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ayedeyglo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).